Veranda 73017996 Instruction Manual

Owner's ManualVersion 1.073017993 / 73017994 / 73017995 / 7301799673017997ModelsAluminum FenceReady-to-AssembleKitAssembly and Installation Instr

What is covered: Barrette Outdoor Living warrants vinyl and aluminum products to include; vinyl and aluminum fence, vinyl and aluminum railing and pla

2Please read these instructions carefully before installing your Barrette fence. If you have any questions or issues installing the fence, please cont

3Product Overview:PostPunched HolesPost TopTop RailMiddle RailBottom RailPicketsProLock™Locking StripProLock™Locking Strip

41122Layout installation• Using the worksheet as a guide, establish your fence line by staking out the areas you wish to enclose. Locate each point i

5335544Make sure arrows on locking strip point towards rail above and place/snap in bumps from locking strip into the holes of the pickets for all rai

63344Start post installation with a gate or a corner – if a gate is not in your plans. Dig post holes to appropriate depth, approximately 6" wide

7CAUTION: Do not install all posts fi rst. Installation should proceed post-panel-post-panel…As the gate post (or corner) is setting up, install the fi

811Self closing hinges are included with all gates. Make sure hinges are set in the proper direction to accommodate either left or right handed gates

944Drive two 11⁄1⁄14⁄4⁄" self-tapping screws through upper hinge into postpost (use the inside holes on the hinge). Repeat for bottom hinge. Scr